|
Dayton Rogers has been a leader in the metal stamping industry for over 70 years. We would love to share some of our knowledge with you. The following booklet can be viewed by chapters here on our website. If you or anyone in your company have any questions or would like additional copies please let us know. We also provide free technical design seminars covering the topics featured in our booklet.
To look over our "Metalforming Design Handbook," please take a minute to fill out some information about your organization.
Click here for Information Request
Table of Contents...
- Problem Solving
- Blank Design
- Piercing Round Holes
- Definition of Punched Holes
- Specification and Measurement of Punched Holes
- Recommended Minimum Ratios of Punched Holes
- Piercing - Adjacent to Bends
- Definition and Limits of Extruded Holes
- Specifications and Measurement of Formed Parts
- Position of the Form
- Height of Form
- Edge Conditions of Formed Parts
- Styles of Embossing
- Specifications and Measurement of Embossed Parts
- Recommended Limits of Embossed Parts
- Specification and Characteristics of Drawn Parts
- Edge Condition of Drawn Parts
- Surface and Characteristic Conditions of Drawn Shapes
- Measurement and Limits of Flatness
- Dimensioning Practices for Turret Press
- Dimensioning Practices for Press Brake
- Laser Cutting
- Laser Operation
- Laser Considerations
- Laser Dimensioning Practices
Dayton Rogers Manufacturing Co. acknowledges, with gratitude, selected illustrations and editorial material supplied by Precision Metalforming Association.
|